Johnson Tools Manufactory Co.,Ltd
Johnson Tools Manufactory Co.,Ltd. Excellent Performance, Your Best choice!
Add to Cart
180mm to 450mm TCT Circular Saw Blade for Wood Cutting , Automatic Brazing , Wood Saw Blade
TCT circular saw blade for cutting wood
Outer diameter: 180mm to 450mm. Other special sizes could be made upon request.
Center hole: 20mm, 22.23mm, 25.4mm.
Application: For cross cutting softwood, hardwood, plywood, chipboard, multi-board panels, MDF, plated & counted -plated panel, laminate& bi-laminate, plastic , FRP, etc.. Providing a high degree of finishing edge.
Advantage: Automatic Brazing & Automatic Grinding Teeth
Details spec.:
| TCT saw blade for wood | ||||
| Item No. | Diameter(mm) | Kerf (mm) | Teeth No. | Teeth Type |
| TCWA1824 | 180 | 2.4 | 24 | WZ |
| TCWA2548 | 250 | 3.0 | 48 | WZ |
| TCWA3024 | 300 | 3.2 | 24 | WZ |
| TCWA3036 | 300 | 3.2 | 36 | WZ |
| TCWA3524 | 350 | 3.5 | 24 | WZ |
| TCWA3536 | 350 | 3.5 | 36 | WZ |
| TCWA3548 | 350 | 3.5 | 48 | WZ |
| TCWA4024 | 400 | 3.5 | 24 | WZ |
| TCWA4036 | 400 | 3.5 | 36 | WZ |
| TCWA4048 | 400 | 3.5 | 48 | WZ |
| TCWA4548 | 450 | 3.8 | 48 | WZ |
How to use TCT blade?
The machine must be in good conditions, free of vibrations.
The flanges used to secure the blade must be of the same diameter, at least 1/3 of the blade’s diameter
the flanges must be parallel to each other. Also check tolerances on diameters, sides, and concentricity, by using a clock gauge
The spacers must be perfectly parallel.
The spindle must be perfectly straight and with an H7 tolerance
After continuous use, must be removed and cleaning the saw blade, get rid of the resin and sawdust of both sides
Deposit of the blade, must be put it into the original package.