Johnson Tools Manufactory Co.,Ltd
Johnson Tools Manufactory Co.,Ltd. Excellent Performance, Your Best choice!
Add to Cart
110mm to 500mm TCT Circular Saw Blades for Aluminum , Aluminum Saw Blade , TCG Type
TCT circular saw blade for cutting aluminum
Outer Diameter: 110 to 500mm
Tooth Model: TCG type.
Application: TCT circular saw blade is designed for cutting aluminum plate/stick which the thickness less than 1/3 diameter of saw blade; and also can be used to cut plastic steel.
Teeth Degree as below:
Advantage: Automatic Brazing & Automatic Grinding Teeth
WARNING: DON'T use to cut ferrous metals (such as steel, iron, etc.) with these saw blades.
OEM Orders: Please show us your drawing or sample.
Details Spec.:
| Diameter | Body Thickness | Saw Blade's Kerf | Hole | Teeth | |
| Inch | mm | (mm) | (mm) | (mm) | |
| 4" | 110 | 1.2 | 1.8 | 20 | 40 |
| 5" | 125 | 1.2 | 1.8 | 20 | 40 |
| 6" | 150 | 1.3 | 2.0 | 20/25.4 | 60 |
| 7" | 180 | 1.3 | 2.2 | 20/25.4 | 60 |
| 7" | 180 | 1.3 | 2.2 | 20/25.4 | 80 |
| 8" | 200 | 1.5 | 2.2 | 20/25.4 | 80 |
| 8" | 200 | 1.5 | 2.2 | 20/25.4 | 100 |
| 9" | 230 | 1.6 | 2.3 | 20/25.4 | 80 |
| 9" | 230 | 1.6 | 2.3 | 20/25.4 | 100 |
| 10" | 250 | 2.0 | 3.0 | 20/25.4 | 80 |
| 10" | 250 | 2.0 | 3.0 | 20/25.4 | 100 |
| 10" | 250 | 2.0 | 3.0 | 20/25.4 | 120 |
| 12" | 300 | 2.0 | 3.0 | 25.4/30 | 80 |
| 12" | 300 | 2.0 | 3.0 | 25.4/30 | 100 |
| 12" | 300 | 2.0 | 3.0 | 25.4/30 | 120 |
| 14" | 350 | 2.2 | 3.2 | 25.4/30 | 100 |
| 14" | 350 | 2.2 | 3.2 | 25.4/30 | 120 |
| 16" | 400 | 2.5 | 3.5 | 25.4/30 | 100 |
| 16" | 400 | 2.5 | 3.5 | 25.4/30 | 120 |
| 18" | 450 | 3.0 | 3.5 | 25.4/30 | 100 |
| 18" | 450 | 3.0 | 3.5 | 25.4/30 | 120 |
| 20" | 500 | 3.0 | 3.8 | 25.4/30 | 100 |
| 20" | 500 | 3.0 | 3.8 | 25.4/30 | 120 |
How to use TCT blade?
The machine must be in good conditions, free of vibrations.
The flanges used to secure the blade must be of the same diameter, at least 1/3 of the blade’s diameter
the flanges must be parallel to each other. Also check tolerances on diameters, sides, and concentricity, by using a clock gauge
The spacers must be perfectly parallel.
The spindle must be perfectly straight and with an H7 tolerance
After continuous use, must be removed and cleaning the saw blade, get rid of the resin and sawdust of both sides
Deposit of the blade, must be put it into the original package.